灌装机的调试方法

The automatic filling machine is also widely used in food, daily chemical, pharmaceutical, petroleum and other industries. It has huge market development potential and reliable quality. After purchasing the automatic filling machine, you still need to debug the required filling machine Filling accuracy and filling speed, in this regard, some people are still more confused, in fact, as long as you complete it once, you will know that it is relatively simple.

The debugging steps of the automatic filling machine are as follows:

1. First loosen the nut of the automatic filling machine, then adjust the screw to change the position of the lower fixed rod, and then the push-pull length of the needle is also changed. In order to achieve the purpose of freely adjusting the dispensing volume, adjust the screw clockwise to increase it, and vice versa , The screw decreases, and the pointer next to it indicates;

2. Tighten the nut after adjustment to make the lower fixed rod and the crank tightly fixed;

3. Loosen the nut and determine the position of the upper fixed rod according to the push-pull length of different injection devices. After adjusting the lower fixed rod, turn the crank to turn the needle up to the top dead center, and then lift the outer tube of the needle up about 2mm to avoid Damage the needle tube, then tighten the nut before opening the machine;

4. After the automatic filling machine is installed correctly, turn on the switch. When the machine is working, the crank drives the injection device to pull the liquid up and down, adjust the speed knob, select the appropriate dispensing speed, and then start normal operation, adjust the speed regulator knob to dispense the speed clockwise Fast, otherwise slow.

The characteristics of the three filling methods of the automatic filling machine:

1. Atmospheric filling method: This type of equipment usually raises the storage tank to increase the pressure. It has its own weight as a driving force and is suitable for processing milk, wine and other products with good fluidity and low viscosity.

2. Negative pressure filling method: This type of equipment is also called a vacuum filling machine. It must ensure that the pressure in the bottle is lower than atmospheric pressure, and then fill the product according to the principle of air pressure balance. This type of equipment is usually simple in structure. But the combination of components has strong air tightness, and there is no major requirement for the viscosity of the material, it can complete the processing of syrup, oil, sauce and other products.

3. Pressure filling method: This equipment is filled under the condition of higher than atmospheric pressure. One is to use the pressure in the storage tank to balance the pressure in the bottle. Filling) into the bottle, the other is to add a booster piston on the top of the tank to help complete the processing. Common filling products include beer, champagne and gaseous beverages. The automatic filling machine is also widely used in food, daily chemical, pharmaceutical, petroleum and other industries. It has huge market development potential and reliable quality. After purchasing the automatic filling machine, you still need to debug the required filling machine Filling accuracy and filling speed, in this regard, some people are still more confused, in fact, as long as you complete it once, you will know that it is relatively simple.