半自动灌装机常见问题解决方法

In the long-term use of the semi-automatic filling machine, various factors or unintentional damage will cause the machine to malfunction. How can we better and quickly solve these problems so that our operations will not be affected? Youlian Machinery will explain some common troubleshooting methods to you, hoping to help you.

1. If the capacity of the utensils to be filled is relatively large during the semi-automatic filling process, but the semi-automatic filling equipment is not sufficient, this will cause instability during the semi-automatic filling. At this time, turn off the switch To restart the filling time.

2. When the filling liquid is stable but the filling volume is incorrect during semi-automatic filling, you need to see if the filling channel is blocked by foreign objects. If it is blocked, just clean it up.

3. The semi-automatic filling machine still has oil leakage when it is turned off. At this time, it is necessary to repair the orifice, as long as it is repaired and then installed.

4. After the semi-automatic filling machine is turned on, the semi-automatic filling is not performed. At this time, it may be that the switch is damaged or the relay is loose. Just repair it.

5. Make sure that the relay is normal, but the semi-automatic filling still cannot start normally. At this time, check whether the air pressure meets the standard of use. If the problem is still not found, check whether the solenoid valve is broken after the semi-automatic filling machine. .